The Raymond mill is one main products of our company. And as one of
the biggest production base in China, our company has produced the
Raymond mill with better WOM in the Raymond mill market.
Raymond Mill is applicable to the grinding and processing of more than 280 kinds
of non-flammable and non-explosive materials with hardness less
than 7 and humidity less than 6% in mining, construction, chemical
industry and metallurgy, such as barite, calcite, feldspar, talcum,
marble, limestone, clay, glass. The fineness of the finished
product can be adjusted from 100 mesh to 325 mesh according to
Technical features of Raymond Mill
1. High-efficiency: the full use of the jet-flow and optimized
impeller structure can greatly improve the crushing and grading
efficiency, thus greatly improving the production.
2. High grading degree: with the frequency conversion and grading
adjustment technology, the Raymond mill have stable and complete grading system and the special sealing
measure ,which can efficiently prevent the leaking of the fine
particles .And the particle size can reach 500—6000monyh and the
thinnest can reach 12000monyh. 3. Low wearing: the crushing wearing parts and the impeller of the
Raymond mill mainly adopts German technology. And with the
optimized design of the inner cavity structure and anti-abrasion
and allergy materials, the Raymond mill has made the lowest wearing parts and the highest purity.
Raymond Mill Repair and Maintenance
1. During the application of our Raymond mill, some personnel shall
be arranged to take responsibility of management from beginning to
end. The operators must be qualified with the required technical
knowledge of operating grinding mills. Before the installation of
this grinding mill, the persons related to the operation should
receive technical training and fully understand the operating
principle, performance and regulations of the Raymond mill.
2. In order to guarantee the Raymond mill in a normal working
state, a safety operation system for the Maintenance of the
equipment must be established. Only in this way can the Raymond
mill be guaranteed to have a long-term and safe operation.
Meanwhile, it is necessary to have the required repairing tools,
lubricant and grease, spare parts and accessories during the
3. After some period of running, the Raymond mill should receive an
examination and repairing. The components vulnerable to worn out,
such as grinding roller, grinding ring, relieving tool etc. should
be repaired or replaced. Before and after the operation, a careful
examination should be carried out for the connecting screws, bolts
and nuts on the grinding rollers so as to find whether they are
loose or sufficiently lubricated.
4. When their application time surpassing about 500 hours, all the
rolling bearings in the roller sleeves of Raymond mill must be
cleaned, and the damaged parts should be replaced. The oiling tool
can be either a manual oiling pump or grease gun
Shanghai Clirik Machinery Co., Ltd
Address: No.19Fuqing Rd,Shanghai 201201,China